The Basement Doctor of Cincinnati Before & After Photos

We covered a crack in this basement with the FlexiSpan system. We start by covering the crack with our patented FlexiSpan caulk. We then cover the caulk with foam that is able to lead any water that still may come through the crack. This water is lead to a trench dug in the concrete in the floor of the basement, directly under the crack. We then cover the foam with another layer of caulk. We then cover the entire crack with a BrightWall panel because it looks clean. The whole goal of this system is to seal the crack and allow any water that still may come through to travel to a trench. Other contractors may opt to just seal the crack, which will just lead to larger cracks because they aren't relieving water pressure off the wall. 

We installed an Egress window in Hamilton, Ohio.  In these photos, you can see the difference in size between the original window and the egress.  An Egress window provides an accessible exit way out of the basement, which could save someone in case of an emergency. 

This home had a sidewalk slab that was sinking.  We used a Polylevel injection system to raise this slab back into place, and then sealed it at the joints. 

This home had some driveway slabs near the garage that had sunk, making it difficult to pull into the garage.  We used the Polylevel injection system to resolve this problem.  Now the Slab is level with the garage floor, and it will be much easier to use the garage. 

This homes front porch and sidewalk was sinking further than the average of what we normally see. PolyLevel foam was sprayed under the concrete to rise it back to normality.