Concrete Lifting and Leveling Before & After Photos

In order to get this front porch back to how it was originally, we had to use our PolyLevel foam. We inject our Polylevel foam under the front porch to raise and level all the different parts of the concrete slabs to make them even again. In order to inject the foam, we only have to drill tiny pea-sized holes in the concrete slabs, which are very inconspicuous. After we level everything out, we then sealed all the gaps and cracks with our NexusPro sealant. The result is a front porch that won't settle again for a long time. Side note: The homeowner took out the flower beds near the front porch so we could have some room to maneuver, that's why you don't see them in the after photo. 

This homeowner called us because they had noticed some large cracks in their garage. They also noticed the cracks were "active" and were spreading in their depth. We went out to first jack the concrete slab with our PolyLevel foam. After everything was level, we then sealed the cracks with NexusPro sealant. It's important to seal large cracks like this because if water gets into the cracks, it can ruin the concrete further. The result was a satisfied customer, who could now stop worrying about their garage floor from cracking.  

Polylevel Injection was used to level out these concrete sidewalk slabs. Polylevel Foam was injected through small holes that were drilled into the slabs. As the foam expanded, it filled the void underneath the slab and raised it to be level with the rest of the sidewalk.

In the before photo, you can see a space between the trim of the stoop and the concrete slab. You can also see where the concrete sidewalk sunk and pulled away from the step.  We used Polylevel Injection to raise the plate. The space between the trim and concrete is now gone, and the sidewalk is level to the step.

This homeowner in Dayton, OH had a back porch that was sinking away from the rest of the home, causing gaps between the brick wall and porch floor. We raised the porch to close these gaps by using our foam jacking method. This foam jacking process, is quicker, cleaner, and more effective than mud jacking. We first drill pea-sized holes in the slabs in order to create an entryway for our foam gun. We then inject our PolyLevel foam under the slabs in order to raise it. We then close and seal all the gaps, then we leave. This homeowner was very impressed with the efficiency of our foam jacking methods, and doesn't have to worry any longer about their back porch sinking.