The Basement Doctor of Cincinnati Before & After Photos

This home in Dayton, Ohio was in need of having their crawlspace locked out from the harmful elements of the open earth. We removed debris from the space, then we installed our Super Pump Plus and our CleanSpace matting. This crawlspace now looks and functions at a high level for the customer. 

This tiny little crawl space was actually in pretty decent condition before we encapsulated, which is actually pretty rare to see. Most people wait until the last minute, which as we all know, will end up costing more in the long run to repair it when you wait. Although in decent condition, this crawl space was showing signs of rot just barely on the beams near the walls and corners of the crawlspace. It was also not insulated the best, something the customer was concerned about. We installed an encapsulation of CleanSpace drainage and matting around the entirety of the crawl space. We also sprayed foam insulation up near the rim joists where the CleanSpace could not reach. We also installed Foamax on one side of the crawlspace, where the crawlspace was closest to the outside air. All in all this was a smart customer who encapsulated and insulated their crawl space so they could save money on energy bills, rim joists repairs, and more importantly, save the air quality they must live with by blocking out moisture. 

This homeowner was having problems with their chimney sinking away from the home. Often times, chimneys have their own foundation and are very heavy, making them sink into the ground. We installed helical piers at the base of the chimney, and raised the base back to where it originally was installed. If you think you have a settling, sinking chimney, be sure to give us a call for a free & honest diagnosis!

We used our helical pier system to push this chimney back up against the home. Our piers are driven deep into load-bearing depths, allowing us to guarantee the structure will be stabilized. The result of this project was a happy homeowner who doesn't have to worry any longer.

Polylevel Injection was used to level out these concrete sidewalk slabs. Polylevel Foam was injected through small holes that were drilled into the slabs. As the foam expanded, it filled the void underneath the slab and raised it to be level with the rest of the sidewalk.