The Basement Doctor of Cincinnati Before & After Photos

This driveway had sank into the ground by about 2-3 inches overtime. This resulted in a 2-3 inch gap between the garage slab and the driveway. This frustrated the homeowner, as pulling in and out of their driveway was becoming increasingly difficult. We were contracted to even out the slabs that connected the driveway to the garage by using our expansive foam jacking method. We were finished with the job in no time, and the homeowners were happy with their level driveway.

This pier underpinning project to stabilize this sinking foundation required us to tear down a fake wall. This homeowner was a previous client of ours when we stabilized the backside of their garage. They were happy with the job we did, so they had us out again to install more piers. This time, we stabilized the front side. If you want to read more about this project, click this link to read our case study! Click here!

This home had a musty smell and bugs coming up from the crawlspace. We fixed these problems by encapsulating it with CleanSpace matting. We also installed SilverGlo insulation panels as well. 

This poured foundation wall in the basement was leaking water due to built up hydrostatic pressure from the outside. We Begun to fix this problem by applying a flexible sealant along the leaking crack. Then, we placed a strip of flexible, porous foam over the sealant. Finally, we attached an impermeable membrane to the wall. This setup ensures that any future water seepage through the crack is directed discreetly into the drainage system below. The result was a happy customer who could finally finish their basement wall once again.